Wolf · Denver
Cooktop Repair
Wolf gas, induction and electric cooktops and rangetops — burners and orifices sized for our elevation, coils, spark electrodes and touch controls.
On the phone
What people describe when they call about this
- One induction zone stops recognising pans and gives no heat
- Flame will not drop low enough to melt chocolate or hold a simmer
- Element sits on full heat wherever the knob is turned
- Charbroiler or a single burner lights, then dies back out
Checked first, before any part is named
Most cooktop calls in this city are set-up faults rather than broken parts. A burner engineered at sea level is running on air roughly a sixth thinner up here, which shows as soot, yellow tips and a simmer that will not come down. Induction is a different animal: it is usually the coil mount, the fan or the board.
- Flame shape at high and at low on every burner, then the orifices and bypass screws against the elevation.
- Spark module output and the electrode gap for a burner that ticks and never catches.
- Coil mounts and the cooling fan under the glass on induction — remodel dust packs those fans solid and the zones start throwing codes.
- The terminal block and its wiring after a boil-over, which is why a pair of elements usually dies together rather than one.
- Pan detection across three different pots before anything is called faulty, so a thin-based pan does not get diagnosed as a dead zone.
What it costs
What a cooktop repair usually comes to
Flat $89 service call covering the visit and full diagnosis, credited against the repair once you approve it.
The figure for parts and labour is agreed with you before the work starts — once the fault is known and before anything is dismantled or ordered. The service call then comes off that figure as soon as you approve it. A band is where a job of this kind lands; the number you are given is the number you pay.
- Igniter or spark module $180 to $470
- Burner valve or orifice service $240 to $560
- Oven thermostat or sensor calibration $210 to $460
- Convection fan or motor $300 to $650
- Control board or touch panel $470 to $910
- Door hinge, glass or seal $270 to $700
For scale, and only once: replacing the appliance instead — a comparable professional range, before installation and ventilation work — runs $7,570 to $18,460. Every band above sits a long way under that, which is usually why the repair is the sensible half of the decision rather than the reluctant one.
Where we run this repair
The other three
Reviews
What cooktop repair calls sound like afterwards
Wolf cooking equipment, in and around Denver.
4.9 / 51,808 reviews
One zone stopped seeing pans altogether: no beep, no heat, nothing. A coil had worked loose from its mount and dropped away from the glass. He reseated it and tested with three different pots.
Booker A.Sloan's Lake
Flame would not come down low enough to melt chocolate. He set the bypass screws for our elevation, one burner at a time. Even from high to low now.
Ferris G.Cranmer Park
The charbroiler lit and then died back to nothing within a minute. A blocked orifice and a lazy thermocouple, both replaced. Four stars because I had to chase the callback.
Serafina L.Sloan's Lake
Denver · Wolf only
Tell us what the cooktop is doing
One call, one reading, one price. The line is answered around the clock and the booking page takes slots at any hour.